Working into the Dark

 Darkness was starting to come earlier but we were determined to finish the job this evening which we accomplished by 9:30 pm that night.

What's interesting is that with the LED Headlights on our heads we were able to keep working uninhibited by the dark. We never needed any other lighting either which we had at the ready.

Some of the lag screws and washers used.

The long galvanized screws became quite a burden to screw in because of the friction with the wood. We screwed them in using a ratchet and socket. By rubbing regular bar soap into the screw threads and on the shaft made the work much easier.